The CreteFill Pro 65™ improved formulation is now moisture insensitive and is designed to fill the joint leaving a smaller bead on the surface, making it much easier to shave. It is a technologically advanced, self-leveling, non staining, 100% solids, two component, 1:1 ratio, polyurea elastomer joint and crack filler. It is designed for concrete with low to medium thermal cycling. CreteFill Pro 65 cures rapidly and consistently in applications ranging from 30°F to 130°F (-1.1°C to 54.4°C). Product is tack free in 4 minutes. Applications can be reopened to vehicle or foot traffic in 1 hour.
CreteFill Pro 65™ is designed to fill and protect joints specifically for industrial floor applications that are subject to heavy vehicle traffic, such as forklifts or steel-wheeled carts. It is used to fill interior random cracks, damaged control joints, or new control joints on horizontal concrete. It is slightly flexible, allowing small slab movement, yet strong enough to protect the vertical edges of concrete from spalling under extreme loading and exterior applications when little joint or crack movement from thermal cycling will occur. Exposure to ultraviolet light may cause discoloration, however the physical properties are unaffected.
CreteFill Pro 65™ is recommended for use on many concrete surfaces, including, but not limited to:
- Industrial and Warehouse Floors
- Manufacturing Facilities
- Pulp and Paper Mills
- Bottling and Canning Facilities
- Water and Waste Water Treatment Plants
- Food Processing Facilities